Glassing the cockpit

The cleanup and rounding over of the cabin roof is complete. I glued some biaxial glass tape over the roof/bulkhead 2 joint to give it more strength before the glass goes on top (maybe 2 layers of glass). Because the fabric in the cockpit extends over the seat-backs down to the side panels for about 4″, I had to use first a bit of coloured epoxy as filler in some parts of the seam between the bottom and the top side panels. After sanding this joint, I was able to wet down a length of glass on either side of the cockpit.

IMG_0717IMG_0718IMG_0719IMG_0720