Furniture and deck cleats (2)

Several little things got done today. I cut and installed the vertical panel for the “boxed in” storage compartment. The top edge needs planing down a tiny bit once things are cured, and the edge where the two panels meet needs to be rounded over.

All cleats for the forward deck are now cleaned, level and squared up. There are a couple of spots where I need to sand off a bit of epoxy squeeze-out underneath … I obviously missed these during my usual post-glueing booger collection procedure.

The bow compartment had its final sanding and another coat of epoxy, and the area forward of bulkhead 2 had its first filler coat.